60HRC Concrete Testing Equipments 16kg JW-225 Test Anvil For Calibration Test Hammer

JW-225 Special Tool Steel Test Anvil Used To Calibrate The Test Hammer

JW-225 Test Anvil Used To Calibrate The Test Hammer

Application:

It is used to calibrate the test hammer.

Parameters:

Features:

1. Test anvil must be located on horizontal ground, take test hammer operation on it and check the rebound value, qualified concrete test hammer will get an average rebound value of 80+/-2 on test anvil, qualified mortar test hammer will get a rebound value of 74+/-2.

2. Test anvil is made from the best steel and special tool steel. Contact area between anvil core and anvil body get excellently polished, and the rigidity of anvil core is HRC58~62.

3. Test anvil is the excellent instrument for assessing test hammer.

4. The test anvil, as a calibration instrument, after each 5000 or 8000 test, the test surface can be polished and then continue using, but the rigidity of core must be HRC58~62, or abolish it.

5. Test anvil usually stored in dry dustproof place, protect its rebound surface from collision.

60HRC Concrete Testing Equipments

16kg Concrete Testing Equipments

JW-225 Test Anvil

60HRC Concrete Testing Equipments 16kg JW-225 Test Anvil For Calibration Test Hammer Images